Filter Defines /Ipx Filter Defines - ADTRAN Express L128T S User Manual

Dst Port
Dst Port Cmpr
Proto
Proto Cmpr
TCP Est

Filter Defines /IPX Filter Defines

Write security: 2; Read security: 3
The IPX filter defines apply to any IPX packet whether it is routed or
bridged. Also, any IPX encapsulation type will be accounted for. Up
to 32 IPX defines can be specified.
Name
Src Net
Src Mask
Dest Net
Dest Mask
Src Socket
61202070L3-20
IP destination port number used for comparison
Range: 0 to 65535. (decimal format)
Type of comparison that is performed
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None means the destination port is not
compared
Protocol used for comparison. Range: 0 to 255.
(decimal format)
Type of comparison that is performed
= means protocols equal to
not = means protocols not equal to
> means protocols greater than
< means protocols less than
None means the protocol is not compared
Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags
Identifies the filter entry (15 characters max)
32-bit source network address
Bits in the source network address which are
compared. (hexadecimal format)
32-bit destination network address
Bits in the destination network address which
are compared. (hexadecimal format)
16-bit value which is the source socket. Range
is 0-65535.
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-35