Chapter 3. Terminal Menu Operation
Utilities/Telnet Client
Write security: 4; Read security: 5
The Telnet menu can be used to activate the telnet client function in
the Express L128T S/T.
Host
Activate
Utilities/Upgrade Menu
Write security: 2; Read security: 3
The Express L128T S/T's firmware can be upgraded using this menu.
Upgrade/Transfer Method
The two methods for upgrading are TFTP and XMODEM. TFTP re-
quires a TFTP server running somewhere on the network. The Ex-
press L128T S/T starts a TFTP client function which gets the upgrade
code from the TFTP server. Selecting XMODEM will load the upgrade
code through the maintenance port using any PC terminal emulator
with xmodem capability. It is recommended to set the baud rate to
57.6 kbps on the maintenance port to expedite the upgrade process.
Upgrade/TFTP Host
This is required when the transfer method is TFTP. It is the IP address
or domain name (if DNS is configured) of the TFTP server.
Upgrade/Filename
This is required when the transfer method is TFTP. It is the case-sen-
sitive file name which is the upgrade code.
3-80
IP address or domain name (if DNS is configured)
of Telnet server.
Starts Telnet client function. The key combination
Control ] cancels the session.
Express L128T S/T User Manual
61202070L3-20