Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation and Structure
device which has negotiated PPP BCP. This menu allows the IPX param-
eters for this virtual Ethernet to be setup.
WAN IPX Bridge/Network
Write security: 2; Read security: 5
This is the network address of the virtual Ethernet port. See "IPX/Net-
work" on page 3-22 for an explanation of the IPX network number.
WAN IPX Bridge/Frame Type
Write security: 2; Read security: 5
This is the frame type used for the virtual Ethernet port. See "IPX/Frame
Type" on page 3-23 for an explanation of the IPX frame type.
WAN IPX Bridge/Seed Status
Write security: 2; Read security: 5
This is the seed status used for the virtual Ethernet port. See "IPX/Seed
Status" on page 3-23 menu for an explanation of the IPX seed status.
WAN IPX Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes, only IPX RIP and SAP updates are sent when the rout-
ing or service table has changed. When set to No (def), updates are sent
at the same rate set for the Ethernet port (see "IPX/RIP Timer" on page 3-24
and "IPX/SAP Timer" on page 3-24).
61200176L3-1
Express 4110/4120 User Manual
3-27
Advertisement
Table of Contents
Troubleshooting
