Filter Defines /Pattern Filter Defines; Filter Defines /Ip Filter Defines - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation

Filter Defines /Pattern Filter Defines

Write security: 2; Read security: 3
The pattern filter is applied to bridge packets only. That is, any packet
which is forwarded by the bridge functionality of the Express L128T
S/T. Up to 32 pattern defines can be specified.
Name
Offset
Pattern
Mask

Filter Defines /IP Filter Defines

Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or
bridged. Up to 32 IP defines can be specified.
Name
IP Src
Src Mask
IP Dest
Dest Mask
Src Port
Src Port Cmpr
3-34
Identifies the filter entry
Offset from beginning of packet of where to start
the pattern comparison
64 bits used for comparison. (hexadecimal
format)
Bits in the pattern to be compared. (hexadecimal
format)
Identifies the filter entry
IP address compared to the source address.
(dotted decimal format)
Bits which are used in the source comparison.
(dotted decimal format)
IP address compared to the destination address.
(dotted decimal format)
Bits which are used in the destination comparison.
(dotted decimal format)
IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Type of comparison that is performed
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None means the source port is not compared
Express L128T S/T User Manual 61202070L3-20