Probe/Active; Probe/Interval; Probe/Update Window; Connection List/Ppp - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation

Probe/Active

Write security: 3; Read security: 5
When set to Yes, the Express L128T S/T will periodically dial this pro-
files dial-out number to get routing and service table updates. The de-
fault is No.

Probe/Interval

Write security: 3; Read security: 5
This is the time the Express L128T S/T waits between probes. The val-
ue is in minutes and ranges from 1 to 240. The default is 15 minutes.

Probe/Update Window

Write security: 3; Read security: 5
This is the time the Express L128T S/T stays connected during a
probe. Normally route and service tables are exchanged immediately
after connection. However, some routers could wait until their regu-
lar RIP or SAP time period has been reached before they advertise
their routes or services to the Express L128T S/T. The value is in sec-
onds and ranges from 5 to 180. The default is 5 seconds and assumes
that a routing update is received upon connection.

Connection List/PPP

The Express L128T S/T supports the IETF standards for the Point-to-
Point Protocol. The PPP state machine running in the Express L128T
S/T can be fine-tuned to support many applications that can be em-
ployed. The configurable items under this menu can be changed from
their default values for special cases.

PPP/Multilink

Multilink PPP allows the two B-channels to be used together for in-
creased bandwidth.
3-48 Express L128T S/T User Manual 61202070L3-20