Chapter 3. Terminal Menu Operation
SNMP/Traps
The Express L128T S/T can generate SNMP traps. This list allows up
to four managers to be listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is
intended for easy reference and has no bearing on the SNMP
trap function.
Traps/Manager IP
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.
Management/Maint Port
The Express L128T S/T has an EIA-232 connector on the back of the
unit. The setup for that port is under this menu.
Maint Port/Password Protect
Write security: 0; Read security: 1
When set to No, the maintenance port is not password protected.
When On (def), the Express L128T S/T will prompt for a password
upon startup.
Maint Port/Password
Write security: 0; Read security: 1
This is the text string that is used for comparison when password pro-
tecting the maintenance port. By default, no password is entered.
The security level for the maintenance port is always set to 0.
This gives full access to all menus.
3-62
Express L128T S/T User Manual
61202070L3-20