Ipx/Seed Status; Ipx/Rip Timer - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation

IPX/Seed Status

Write security: 2; Read security: 5
The seed status defines what the Express L128T S/T is to do with the
network information on the selected frame type during startup. There
are three possible seeding selections specified:
Seed
Non-Seed
(def)
Auto-Seed

IPX/RIP Timer

Write security: 3; Read security: 5
This value specifies how often the Express L128T S/T sends out IPX
RIP packets on the network segment attached to the Ethernet port.
The RIP packets sent contain routing information about the networks
for which this Express L128T S/T is responsible. The default value is
60 seconds.
3-22
The Express L128T S/T will listen for an IPX network
number being sent by another router (including Novell
software routers residing on servers) on the Ethernet
segment connected to this port and use this number if it
exists. If it doesn't discover a number in use, the Express
L128T S/T will use the configured IPX network number for
the Ethernet segment.
The Express L128T S/T will listen for an IPX network
number being sent by another router (including Novell
software routers residing on servers) on the Ethernet
segment connected to this port and use this number if it
exists. If it doesn't discover a number in use, the Express
L128T S/T will wait indefinitely until a number is sent by
another router on the Ethernet segment.
The Express L128T S/T will listen for an IPX network
number being sent by another router (including Novell
software routers residing on servers) on the Ethernet
segment connected to this port and use this number if it
exists. If it doesn't discover a number in use, the Express
L128T S/T will auto-generate a valid number using its
routing tables.
Express L128T S/T User Manual 61202070L3-20