Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation
IP/RIP
The RIP parameters can be adjusted from their defaults under this
menu. The RIP parameters for all WAN connections are set on a per-
session basis.
RIP/Mode
Write security: 3; Read security: 5
The Express L128T S/T performs RIP over the WAN connection
when this is set to On (def).
RIP/Protocol
Write security: 3; Read security: 5
The Express L128T S/T performs version 1, V1 (def), or version
2, V2, of RIP on this WAN connection.
RIP/Method
Write security: 3; Read security: 5
Split Horizon
Poison
Reverse (def)
None
RIP/Direction
Write security: 3; Read security: 5
Tx and Rx (def) RIP advertisements are transmitted and listened to
Tx only
Rx only
3-44
Only routes not learned on the WAN connection
are advertised on the WAN.
All routes are advertised on the WAN, including
routes learned from the WAN connection. These
routes are poisoned.
All routes are advertised on the WAN, including
routes learned from the WAN connection. No
attempt is made to poison these routes.
on the WAN connection.
RIP advertisements are transmitted and not listened
to on the WAN.
RIP advertisements are listened to but not
transmitted on the WAN.
Express L128T S/T User Manual
61202070L3-20
Advertisement
Table of Contents
Troubleshooting
