Filters/Dem Dial Exceptions - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation
mand traffic from overhead traffic like certain broadcast and multicast
packets. There are three possible selections for this parameter:
Disabled (def)
Ignore All
Demand All

Filters/Dem Dial Exceptions

Write security: 2; Read security: 5
This is a list of up to 32 filter entries. The setup is exactly the same as
the Filter/In Exceptions list.
3-58
Turns off demand dial filtering. No packets cause
demand dialing for this profile and all outgoing
and incoming packets reset the idle timer.
When connected in any mode (Bridge, IP Router,
or IPX router), the idle timer is reset only when
there is a match in the Filters/Dem Dial
Exceptions list.
When not connected in Bridge mode only, causes
the Express L128T S/T to dial using this
Connection List profile if there is a match in the
Filters/Dem Dial Exceptions.
When connected in any mode (Bridge, IP Router,
or IPX router), the idle timer is always reset except
when there is a match in the Filters/Dem Dial
Exceptions list. When not connected in Bridge
mode only, causes the Express L128T S/T to dial
using this Connection List profile if there is NOT a
match in the Filters/Dem Dial Exceptions list.
Express L128T S/T User Manual 61202070L3-20