ADTRAN Express L128T S User Manual page 26

Quick Startup Guide
4. Use the arrow keys to get to the Configuration/IPX menu. Set
the Network value to the IPX network supplied by the network
administrator. Set the Seed Status to Seed if a Novell server is
not present on the LAN; otherwise select Non-seed or Autoseed.
Arrow left and save the changes with a y when prompted.
5. Move to the Configuration/Connection List. Use the arrow keys to
move the cursor over the Num column. Type I to insert a new entry.
6. Move the cursor over the Description field and press Enter. A
pop up window appears in which to enter a name for this Con-
nection List profile.
7. Move the cursor over the Authentication menu and press
Return. This will place the authentication parameters into the
right pane.
8. Enter the username and password under Tx Username and Tx
Password. These items should be provided by the administrator
at the site being dialed. See Authentication/Rx Username on page 3-
40 and Authentication/Rx Password on page 3-41 if expecting to
receive calls.
9. Use the down arrow to display the IP menu parameters in the
right pane.
10. Move the cursor over the Route menu and press Return.
11. Enter the IP address and Netmask parameters of the access
server at the remote site. This creates a static route to the access
server's network which is entered into the Express L128T S/T's
IP route table.
12. Move the cursor over the RIP menu. Check with the network
administrator for the type of routing protocol used. The Express
L128T S/T supports RIP versions 1 and 2. The protocol is set in
the Protocol parameter.
13. Select Yes for the Triggered parameter. This will prevent periodic
RIP updates that keep the ISDN link from going "idle."
14. Select Yes for the Retain parameter. This will allow the routes
learned from the access server to be saved in the IP routing table.
Access to any of those networks from the workstation will cause
this profile to be dialed.
15. Use the left arrow to get back to the previous menu. Use the
down arrow to view the IPX menu parameters in the right pane.
Quick Start-4 Express L128T S/T User Manual 61202070L3-20