Configuration/Ipx; Ipx/Mode; Figure 3-5. Configuration/Ipx Screen - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation
fact that a network has been (further) subnetted. If this option is set to
Yes (def), when an ARP request is received on the Ethernet port the
address is looked up in the IP routing table. If the forwarding port is
not on the Ethernet port and the route is not the default route, the Ex-
press L128T S/T will answer the request with its own hardware ad-
dress. If set to No, the Express L128T S/T will only respond to ARP
requests received for its own IP address.

Configuration/IPX

The IPX menu is used to set up the IPX parameters for the Express
L128T S/T. Any general IPX-related configuration item can be found
under this menu. Figure 3-5 shows the IPX menu.

Figure 3-5. Configuration/IPX Screen

IPX/Mode

Write security: 2; Read security: 5
When this option is set to On (def), the Express L128T S/T will route
IPX. Setting it to Off will disable all IPX functionality.
3-20 Express L128T S/T User Manual 61202070L3-20