Status/Ip Stats - ADTRAN Express L128T S User Manual

Rx Errors
CRCs
Giants
Runts
Rx Collisions
Clear Counts

Status/IP Stats

Read security: 5
This menu contains IP statistics that can be useful when diagnosing
problems. All are taken from the SNMP MIB-2 variables.
TCP failed attempts
TCP passive connections
TCP current connections
TCP segments sent
TCP segments received
Total TCP resets
Active TCP connections
Total TCP retransmits
UDP datagrams sent
No application at dest. port
UDP datagrams received
UDP bad packets
ICMP redirected messages
ICMP packet errors
ICMP timeouts received
ICMP messages sent
ICMP messages received
ICMP specif if errors
61202070L3-20
Total packets received in error and dropped
total packets detected with CRC errors
total packets received that were greater than
1518 bytes
total packets received that were less than 64
bytes
total collision occurred during reception
When activated, clears all LAN Stat counts.
IP datagrams reassembled
IP datagrams sent
IP datagrams received
Total forwarded datagrams
IP reassembly timeout
Discarded routing entries
Total IP fragments
Failed fragments
IP reassembly failures
Disassembled fragments
Errorfree discards
Routeless discards
Default TTL
Bad IP addresses
Successful fragments
Bad header packets
Sent datagrams to upper layers
Datagrams discarded
Bad protocol discards
Clear Counts - clears all IP stats
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-73