Firstech CM7000 Master Manual page 48

CM7000 Master Guide
SV 10 -
AUX1:
remote, 2way LCD remote, or Drone, on any POC programmed with this setting.
SV 11 -
AUX2:
remote, 2way LCD remote, or Drone, on any POC programmed with this setting.
SV 12 -
AUX3:
LCD remote (please refer to remote users guide for activation steps), on any POC
programmed with this setting.
SV 13 -
AUX4:
AUX4 is triggered using a Firstech 2 way LCD remote (please refer to remote users guide for
activation steps),
SV 14 -
AUX5:
when AUX5 is triggered, using a Firstech 2 way LCD remote (please refer to remote users
guide for activation steps), on any POC programmed with this setting. (Feature 3-11 must be
set to option 2)
SV 15 -
AUX6:
when AUX6 is triggered, using a Firstech 2 way LCD remote (please refer to remote users
guide for activation steps), on any POC programmed with this setting. (Feature 3-11 must be
set to option 2)
SV 16 -
AUX7:
using a Firstech 2 way LCD remote (please refer to remote users guide for activation steps
(Feature 3-11 must be set to option 2)
SV 17 -
Defrost:
when defrost function has been activated (output time based on features 3-13 and 3-14
option settings)
SV 18 -
GWA (ground While Armed):
programmed with this setting, while the system is armed or locked.
SV 19 -
GWR 2 (status output 2):
with this setting, when the remote start sequence is activated and continue until after the
remote start has shut down.
during reservation mode set up in order to avoid any possible factory immobilizer
issue that may occur if the vehicle sees 2 or more immobilizer override coding.
SV 20 -
Siren 2:
only with the full alarm or panic modes. May be used to power any additional horn or sirens
while the CM7 is in full alarm or panic mode.
SV 21 -
Defrost 2:
this setting, when the defrost output is engaged based on the temp setting of feature 3-13.
SV 22 -
VAC (Ventilation and Air Conditioning):
POC programmed with this setting, when the VAC feature is activated based on temperature
settings of feature 3-12 during the remote start sequence.
SV 23 -
PTS control:
SV 24 -
AUX3 EZGO:
setting, (based on timing set for AUX 3)
proximity unlock feature.
SV 25 - provides a 250mA (-) negative output on any POC programmed with this setting, with
Lock:
the lock/arm command.
Copyright 2014 Firstech, LLC.
provides a 250mA (-) negative output when AUX is triggered by Firstech 4 button
provides a 250mA (-) negative output when AUX is triggered by Firstech 4 button
provides a 250mA (-) negative output when AUX3 is triggered, using a Firstech 2 way
provides a 250mA (-) negative output on any POC programmed with this setting,when
(Feature 3-11 must be set to option 2)
provides a 250mA (-) negative output on any POC programmed with this setting,
provides a 250mA (-) negative output on any POC programmed with this setting,
provides a 250mA (-) negative output on any POC programmed with this setting,
provides a 250mA (-) negative output on any POC programmed with this setting,
provides a 250mA (-) negative output on any POC programmed
Note: With GWR 2 the output will not provide ground
provides a 250mA (-) negative output on any POC programmed with this setting,
provides a 250mA (-) negative pulsed output only on any POC programmed with
More info coming soon
provides a 250mA (-) negative output on any POC programmed with this
(Feature 3-11 must be set to option 2)
provides a 250mA (-) negative output on any POC
provides a 250mA (-) negative output on any
only when the CM7 is unlocked using the EZGO
Alarm and Starter System
techfeed.compustar.com
Page 48