Installing The Optional Drawer - Kyocera Mita KM-1810 Service Manual

2A1/2

1-3-4 Installing the optional drawer

Procedure
1. Remove the tapes, pad and plastic bag from the
optional drawer.
2. Place the copier on top of the optional drawer
such that the right and left covers of the copier
become flush with the drawer cover.
Caution: Two people are required to move the
copier. Stand on the front and rear sides
of the copier and hold it tightly by the
handles on the sides. Carrying the copier
standing on its right and left sides or
holding it by the drawer may damage the
copier or cause injury.
3. Insert the power plug of the copier to the wall
outlet and turn the main switch on.
1-3-16
Tapes
Tape
Pad
Tape
Figure 1-3-21
Figure 1-3-22
Power plug
Figure 1-3-23
Tapes
Optional drawer