Adjusting The Leading Edge Registration For Memory Image Printing - Kyocera Mita KM-1810 Service Manual

(4-2) Adjusting the leading edge registration for memory image printing

Make the following adjustment if there is a regular error between the leading edge of the copy image and the leading
edge of the original during memory copying.
U066
U034
(P. 1-6-12) (P. 1-6-29)
Caution:
Before making the following adjustment, ensure the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "407" using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Press the printer key and the machine
enters the test copy mode.
Press the start key
and make a test copy.
Is the leading edge
registration correct?
Press the stop/reset key to
exit maintenance mode.
U407
Start
No
Yes
End
Original Copy
example 1
Figure 1-6-25
Press the start key.
The new setting is stored.
For copy example 1, decrease the
value using the zoom (–) key.
For copy example 2, increase the
value using the zoom (+) key.
Setting range: –10 – +10
Initilal setting: 0
Changing the value by 1 moves
the leading edge by 1 mm.
2A1/2
Copy
example 2
1-6-13