Making Copies On Paper Loaded Into The 1St Drawer (Multipurpose Paper Drawer) - Kyocera Mita KM-C1530 Instruction Handbook Manual

Basic Operations
5.3 Making Copies on Paper Loaded into the 1st
Drawer (Multipurpose Paper Drawer)
When making continuous copies onto special paper, such as overhead
projector transparencies, postcards or thick paper, whether a standard or
non-standard size, load the paper into the 1st drawer (the multipurpose
paper drawer).
Sizes and types of paper that can be used:
G
Automatically detected paper sizes:
5-1/2 × 8-1/2L, 5-1/2 × 8-1/2C, ExecutiveL, ExecutiveC, LetterL,
LetterC, LegalL, 11 × 17L, 12-1/4 × 18L
G
Manually set paper sizes:
A6L, B6L, A5L, A5C, B5L, B5C, A4L, A4C, B4L, A3L, 11 × 14L, FLS L,
4 × 6
Refer to the section "To set the "1st Drawer Paper Select" parameter"
on page 7-18 for more details.
G
Selectable paper sizes
Width: 3-9/16 to 12-1/4 in. (90 to 311 mm)
Length: 5-1/2 to 18 in. (140 to 457 mm)
Refer to the section "To set the "1st Drawer Paper Select" parameter"
on page 7-18 for more details.
G
Paper types:
Standard paper (thickness: 17 to 24 lbs.)
Thick paper 1 (thickness: 24-1/4 to 43-1/4 lbs.)
Overhead projector transparencies
Second side of a double-sided copy on standard paper
Second side of a double-sided copy on thick paper 1
KM-C1530
5
5-5