Loading Paper Into The Side Feeder (An Optional Drawer[Cassette]) - Kyocera Mita KM-7530 Operation Manual

Table of Contents

Advertisement

Section 3 PREPARATIONS
(5) Loading paper into the Side Feeder
(an optional drawer[cassette])
Up to 4000 sheets of 11" x 8
1/2
2
2
(75 g/m
– 80 g/m
) can be loaded into the optional Side Feeder.
IMPORTANT!
The type of paper loaded in the Side Feeder must be specified under
"Paper type (drawer[cassette] No.1 - No.4)" on page 7-24.
NOTE
(Only for metric specification copiers produced for the Asia-Pacific
region)
• The standard setting for the Side Feeder is for A4 size paper.
Contact your service representative or authorized service center if
you want to change it for use with B5 size paper.
1
Hold down the paper plate up/down switch located on the
right side of the Side Feeder.
NOTES
• If there is no paper in the Side Feeder, the paper plate inside the
Side Feeder will already have been lowered automatically to its
lowermost position.
• If the right cover to the Side Feeder is open, the paper plate will not
move even if you press this switch.
2
Open the right cover to the Side Feeder.
3-6
" , A4 or B5 size standard copy paper
NOTE
If you open the upper cover as well, it will be easier to load paper into
the Side Feeder.
3
Align the paper flush against the left side of the paper plate,
and then set the paper in the Side Feeder.
IMPORTANT!
• Make sure there are no folds, etc., in the paper you load into the
Side Feeder. Folds, etc., can cause paper jams.
• DO NOT load more paper than is indicated by the label located on
the inside of the Side Feeder (shown as 1 in the illustration).
• When you are loading paper into the Side Feeder, make sure that
the side that was facing upward when you opened the package is
still facing upward.
NOTE
When you are loading paper onto the Side Feeder, make sure that the
side to be copied onto is facing upward.
4
Close the upper cover, if necessary, and then close the right
cover.
NOTE
If you will not be using the copier for a prolonged period of time,
remove all paper from the Side Feeder and seal it in its original
packaging in order to protect it against moisture.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-6330

Table of Contents