Table of Contents
Advertisement
2A1/2
1-6-4 Image formation section
(1) Detaching and refitting the image formation unit
Follow the procedure below to replace or check the image formation unit.
Prucedure
1. Pull the drawer out and open the front cover,
bypass tray and paper conveying unit.
2. Remove the waste toner tank and toner
container.
3. Remove the two screws holding the waste
toner tank cover and then the cover.
4. Remove the screw holding the developing
retainer and then the retainer.
5. Remove the two screws and datach the
connector and remove the image formation
unit.
1-6-32
Waste toner tank
Developing retainer
Figure 1-6-56
Image formation unit
Figure 1-6-57
Connector
Hide quick links:
Advertisement
Table of Contents
