Installing The Printer Board/Network Board (Option) - Kyocera Mita KM-1810 Service Manual

2A1/2

1-3-5 Installing the printer board/network board (option)

Procedure
1. Remove the tape keeping the cover of the printer
board from rotating.
2. Remove the printer cover from the copier by
firmly pressing the part marked with a triangle.
3. Remove the two pins securing the shield cover
and then remove the cover.
1-3-18
Printer board
Figure 1-3-26
Printer cover
Figure 1-3-27
Sheild cover
Pins
Figure 1-3-28
Tape