Table of Contents
Advertisement
2A1/2
1-2-3 Installation environment
1. Temperature: 10 - 32.5 C/50 - 90.5 F
2. Humidity: 20 - 85%RH
3. Power supply: 120 V AC, 9 A
220 - 240 V AC, 4.8 A (average 2.5 A)
4. Power source frequency: 50 Hz 0.3%/60 Hz 0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be exposed to direct sunlight or other
strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature changes, and hot or cold air directed onto
the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1 ).
• Avoid air-borne substances that may adversely affect the machine or degrade the photoconductor, such as
mercury, acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
Machine right: 300 mm/11
• 15 cpm copier
d
c
Figure 1-2-1a Installation dimensions
• 18 cpm copier
d
c
Figure 1-2-1b Installation dimensions
1-2-2
3
/
" Machine rear: 300 mm/11
8
13
/
" Machine left: 500 mm/19
16
g
a b
g
a b
13
/
"
16
11
/
"
16
e
f
e
f
13
a: 376 mm/14
/
"
16
3
b: 462 mm/18
/
"
16
9
c: 497 mm/19
/
"
16
7
d: 722 mm/28
/
"
16
9
e: 497 mm/19
/
"
16
5
f: 847 mm/33
/
"
16
1
g: 845 mm/33
/
"
4
1
a: 445 mm/17
/
"
2
11
b: 526 mm/20
/
"
16
9
c: 497 mm/19
/
"
16
13
d: 605 mm/23
/
"
16
9
e: 497 mm/19
/
"
16
5
f: 847 mm/33
/
"
16
5
g: 871 mm/34
/
"
16
Hide quick links:
Advertisement
Table of Contents
