1-3-1 Unpacking and installation
(1) Installation procedure
Caution:
Be sure to install a waste toner tank when setting the machine.
Start
Unpack.
Remove the tapes.
Adjust the fixing pressure.
Remove the tapes, pads and sheet inside the drawer.
Remove the pins holding light source units 1 and 2.
Remove the pad inside the machine.
Install a toner container.
Install a waste toner tank.
Attach the original holder (15 cpm copier).
Connect the power cord.
Load paper.
Make test copies.
Completion of the machine installation.
2A1/2
1-3-1