Installing The Memory Board (Standard For 18 Cpm/Optional For 15 Cpm) - Kyocera Mita KM-1810 Service Manual

1-3-6 Installing the memory board (standard for 18 cpm/optional for 15 cpm)

Note: Make sure that the DIMM is securely inserted
on the memory board before starting
installation.
Procedure
1. Remove the printer cover from the copier by
firmly pressing the part marked with a triangle.
2. Remove the two pins securing the cover on the
copier and then remove the cover.
Printer cover
Figure 1-3-34
Cover
Pins
Figure 1-3-35
2A1/2
1-3-21