Running A Maintenance Item - Kyocera Mita KM-1810 Service Manual

2A1/2

(2) Running a maintenance item

Press the stop/reset key, start key
and the left copy exposure adjustment
key in the order presented and hold
them down.
Enter the number of the maintenance
item to be executed using the copy
exposure adjustment keys or the zoom
+/- keys.
Yes
Yes
Enter 001 using the copy exposure
adjustment keys or the zoom +/- keys,
and press the start key.
1-6-PB
Start
Press the stop/reset key.
Press the start key.
The maintenance item is run.
Press the stop/reset key.
Run the item again?
No
Run another maintenance
mode?
No
End
· · · · · · · Entering the maintenance mode
· · · · · · · Selecting a maintenance item
· · · · · · · Exiting the maintenance mode