St Paper Conveying Roller (Option); Detaching And Refitting The St Paper Conveying Roller - Kyocera Mita KM-1810 Service Manual

2A1/2

(2-2) Detaching and refitting the ST paper conveying roller

Procedure
1. Remove the ST paper feed unit (see page 1-
6-5).
2. Remove the stop ring and two gears toward
the rear side of the ST paper feed unit.
3. Remove the stop ring and the bushing.
4. Remove the stop ring and bushing from the
front side of the ST paper feed unit and
detach the ST paper conveying roller.
5. Replace the ST paper conveying roller and
refit all the removed parts.
1-6-PB
Gear
Gear
Stop ring
Figure 1-6-14
Stop ring
Bushing
Figure 1-6-15
Bushing
Figure 1-6-16
ST paper conveying roller
Stop ring