Paper Misfeed Detection; Paper Misfeed Indication - Kyocera Mita KM-1810 Service Manual

1-5-1 Paper misfeed detection

(1) Paper misfeed indication

When a paper misfeed occurs, the copier immediately stops copying and displays the jam location on the operation panel.
Paper misfeed counts sorted by the detection condition can be checked in maintenance item U903.
To remove paper jammed in the copier, open the paper conveying cover or pull the drawer out.
To remove original jammed in the DF, open the DF original switchback cover.
Paper misfeed detection can be reset by opening and closing the respective covers to turn safety switch off and on.
3
Jam code
PF
PF
PF
15
20
22
30
40
50
70
72
73
2 1 4
Figure 1-5-1
Contents
No paper feed from drawer
No paper feed from optional drawer
No paper feed from bypass
Misfeed in copier vertical paper conveying section
Multiple sheets in copier paper feed section
Multiple sheets in bypass tray
Misfeed in registration/transfer section
Misfeed in fixing section
Misfeed in eject section
No original feed
An original jam in the original feed and conveying section 1
An original jam in the original feed and conveying section 2
Table 1-5-1
1 Misfeed in paper feed section
2 Misfeed in paper conveying section
3 Misfeed in DF
4 Misfeed in optional drawer
See pape
P.1-5-3
P.1-5-3
P.1-5-3
P.1-5-3
P.1-5-3
P.1-5-4
P.1-5-4
P.1-5-4
P.1-5-4
P.1-5-5
P.1-5-5
P.1-5-5
2A1/2
1-5-1