Unpacking And Installation; Installation Procedure - Kyocera Mita KM-1530 Service Manual

1-3-1 Unpacking and installation

(1) Installation procedure

Remove the tapes.
Remove the pins holding light source units 1 and 2.
Install the optional devices.
Remove the image formation unit.
Load developer.
Release the cleaning blade.
Install a waste toner tank.
Start
Unpack.
Adjust the fixing pressure.
Connect the power cord.
Carry out initial developer setting
(maintenance item U130).
Load paper.
Output an own-status report
(maintenance item U000).
Exit maintenance mode.
Install a toner cartridge.
Make test copies.
Completion of the machine installation.
2AV/X
1-3 1-3
1-3-1