Table of Contents
Advertisement
INSTALLATION PRECAUTIONS
•l Environment
Avoid placing the copier on or in locations which are
l
unstable or not level. Such locations may cause the
copier to fall down or fall over. This type of situation
presents a danger of personal injury or damage to the
copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avoid locations with humidity or dust and dirt. If dust or
l
dirt become attached to the power plug, clean the plug
to avoid the danger of fire or electrical shock.
. Avoid locations near radiators, heaters, or other heat
sources, or locations near flammable items, to avoid
the danger of f i r e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To keep the copier cool and facilitate changing of
l
parts and maintenance, allow access space as shown
below.
Leave adequate space, especially around the left
cover, to allow air to be properly ventilated out of
the copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Always use the caster stoppers to stabilize the copier
l
once it is in place to keep it from moving and/or falling
over and causing i n j u ry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other
precautions
Adverse environmental conditions may affect the safe
l
operation and performance of the copier. Install in an
air-conditioned
room
(recommended
around 2O"C, humidity: around
following locations when selecting a site for the copier.
. Avoid locations near a window or with exposure to
direct
sunlight.
. Avoid locations with vibrations.
. Avoid locations with direct exposure to hot or cold air.
. Avoid poorly ventilated locations.
l-3
. . . . . . . . . . . .
room
temperature:
65%RH)
and avoid the
n
Power supply/Grounding the copier
DO NOT use a power supply with a voltage other than
l
that specified. Avoid multiple connections in the same
outlet. These types of situations present a danger of
fire or electrical shock. . . . ............................................
Plug the power cord securely into the outlet. If metallic
l
objects come in contact with the prongs on the plug, it
may c a u s e a fire or electric shock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Always connect the copier to an outlet with a ground
l
connection to avoid the danger of fire or electrical shock
in case of an electric short. If an earth connection is
not possible, contact your service representative. . . . . .
Other
precautions
Connect the power plug to the closest outlet possible to
l
the copier.
q
Handling of plastic bags
Keep the plastic bags that are used with the copier away
l
from children. The plastic may cling to their nose and
m o u t h causing suffocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hide quick links:
Advertisement
Table of Contents
