Adjusting The Leading Edge Registration For Memory Image Printing - Kyocera Mita KM-1530 Service Manual

2AV/X

(6-2) Adjusting the leading edge registration for memory image printing

Make the following adjustment if there is a regular error between the leading edge of the copy image and the leading
edge of the original during memory copying.
U053
(P. 1-4-11)
Caution:
Before making the following adjustment, ensure the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "407" using the numeric keys.
Press the interrupt key.
1-6
Press the start key
and make a test copy.
Press the stop/clear key to
exit maintenance mode.
1-6-12
U034 U065
(P. 1-6-13) (P. 1-6-32)
Start
Press the start key.
Is the leading edge No
registration correct?
Yes
End
U066
U407
(P. 1-6-36)
Original
Press the start key.
The new setting is stored.
• 20 cpm
For copy example 1, decrease the
value using the cursor left key.
For copy example 2, increase the
value using the cursor right key.
• 15 cpm
For copy example 1, decrease the
value using the zoom (–) key.
For copy example 2, increase the
value using the zoom (+) key.
Setting range: –10 – +10
Initilal setting: 0
Changing the value by 1 moves
the leading edge by 1 mm.
Copy Copy
example 1 example 2
Figure 1-6-20