8
8.4
When the Message "Cannot Staple." Appears
To clear jammed staples
When a finisher is installed and the staples are jammed, the message shown below
appears.
Follow the procedure described below to clear the jammed staples.
Follow the procedure described below to remove the paper and staples.
Note
When the message "Cannot Staple." appears, clear the jammed staples as de-
scribed below.
If the following procedure is not followed and the paper is pulled out with too
much force, the stapler unit may be damaged.
1
Remove all paper from the
finisher.
8-28
8.4 When the Message "Cannot Staple." Appears
Di2010f/Di2510f/Di3010f/Di3510f