Minolta Di2010f User Manual page 14

1.4 Components and Their Functions
No. Part Name
7 Paper Feed Unit PF-124
(optional)
8 Buitlt in Finisher FN-117
(optional)
9 Additional Bin Kit AK-1
(optional)
10 Saddle Kit SK-1 (optional)
11 Stapling kit for saddle kit
MS-2C*
12 Stapling kit for Finisher
MS-5D*
13 Mail Bin Kit MK-1 (optional)
14 Punch Kit PK-6
(optional)*
Di2010f/Di2510f/Di3010f/Di3510f
13 10
9
7
Description
Equipped with a paper drawer that can supply 500 sheets of
paper, for upper paper feed unit only.
Referred to as the "paper feed cabinet" throughout the manual.
Finishes printed pages according to the selected finishing mode
(sorting or stapling), then feeds out the pages
Referred to as the "finisher" throughout the manual.
If this option is attached to the finisher, the bins for separating
printed pages increases.
Referred to as the "3rd paper output tray" throughout the
manual.
If this option is attached to the finisher, stapling, hole-punching,
creasing and booklet-printing are available as Finishing
settings.
Referred to as the "saddle kit" throughout the manual.
If this option is attached to the saddle kit, center stapling is
available as a Finishing setting.
Referred to as the "stapling kit" throughout the manual.
If this option is attached to the finisher, corner stapling and
center stapling are available as a Finishing setting.
Referred to as the "stapling kit" throughout the manual.
If this option is attached to the finisher, the printed pages can be
divided and fed into the appropriate bin assigned to a specific
individual or group.
*This option can only be used with computer printouts.
Referred to as the "mail bin kit" throughout the manual.
If this option is attached to the finisher, hole-punching is
possible.
Referred to as the "punch kit" throughout the manual.
8
1
1-7