Di2010F/Di2510F/Di3010F/Di3510F; Loading Documents For Specific Applications - Minolta Di2010f User Manual

6.4 Loading Documents for Specific Applications

6.4 Loading Documents for Specific Applications
The most appropriate document feed method and copy settings for specific appli-
cations are described below.
For details on specifying the various copy settings, refer to "7 Specifying Copy Set-
tings".
Description of the Table
1
Single-Sided Document Ö
Single-Sided Copy
Desired Copy
2
1
3
1. Shows whether the original document and the desired copy are single-sided or
double-sided
2. Shows how the copy will appear
3. Shows how the document should be positioned (page 6-5)
4. Shows the selected Copy setting (Single-Sided, Double-Sided, 2in1 or 4in1) on
the Orig. Ö Copy screen (page 7-19)
5. Shows the selected Finishing setting (Corner Staple, 2-Point Staple or Hole
Punch) (page 7-2)
6. Shows the selected Margin setting from the Orig. Ö Copy screen if a margin is
specified for the document (page 7-24)
7. Shows the selected File Margin setting from the Auxiliary screen if a binding
margin is specified for the copy (Advanced Operations volume)
8. Shows the stapling or hole-punching position that must be selected (page 7-7
and page 7-9)
* A dash (—) indicates that no setting should be selected.

Di2010f/Di2510f/Di3010f/Di3510f

2 3 4
5
Copy Finishing
Setting Setting
Single- Corner Staple
Sided
6 7
Margin File
Setting Margin
(Orig. Ö
Setting
Copy (Auxiliary
Screen) Screen)
— —
6
8
Binding
Position
—
6-11