Table of Contents
Advertisement
3
When the machine is turned off
G
Settings that are not programmed, such as the number of copies, are cleared.
G
Jobs that are queued to be printed are deleted.
G
Data scanned using the "Scan to Memory" function is deleted.
G
Scanned data that could be printed using the "Memory Recall" function is delet-
ed.
Auto Panel Reset
When the auto panel reset operation is performed, all settings that are not pro-
grammed, such as the number of copies, are cleared and reset to their default set-
tings automatically.
<Conditions for auto panel resetting>
G
No machine operation is performed for one minute.
G
The magnetic card is removed from the data controller or the key counter is re-
moved.
Note
The settings specifying whether or not and the time until the auto panel reset
operation is performed can be changed. For details, refer to "Changing Default
Settings" of "Utility Mode Operations" in the Advanced Operations volume of the
User Manual.
Energy Save Mode
In order to conserve energy, the machine will automatically enter a stand-by mode
(Energy Save mode) if no operation is performed for a specified length of time.
When the machine enters Energy Save mode, the indicator on the [Start] key re-
mains lit in green, but the touch panel goes off.
<Conditions for entering Energy Save mode>
G
No machine operation is performed for 15 minutes.
Note
To recover from Energy Save mode, press any key in the control panel or touch
the touch panel.
The settings specifying whether or not and the time until the machine enters En-
ergy Save mode can be changed. For details, refer to "Changing Default Set-
tings" of "Utility Mode Operations" in the Advanced Operations volume of the
User Manual.
3-12
3.5 Turning the Machine On and Off
Di2010f/Di2510f/Di3010f/Di3510f
Advertisement
Table of Contents
