When The Message "Replenish Paper." Appears; Adding Paper - Minolta Di200 User Manual

5-2

1. When the Message "Replenish paper." Appears

Adding paper

1st Drawer
1
Slide out the 1st Drawer.
NOTE
Be careful not to touch the surface of the paper
take-up roller with your hands.
2
Press the Paper Lifting Plate down until it
locks.
]
When the drawer currently selected for use runs
out of paper, the message shown on the left
appears and the machine interrupts the current
print cycle. The drawer whose indicator is lit up on
the Touch Panel has run out of paper.
Add paper by using the following procedure.
4012P161DB
3
Paper take-up roller
4015O068AB
NOTE
4
4015O069AB
NOTE
Align the Edge Guide properly with the end face
of the paper stack.
Load the paper stack into the drawer so that
its front side faces up.
The paper should be
loaded no higher than
(Max. Level Indicator).
4015O202AA
Pinch the tabs on the Edge Guide and
Trailing Edge Stop and slide them to the
exact size of the paper loaded.
4015O070AB
4015O071AB