To Load Plain Paper - Minolta Di2010f User Manual

5.6 Loading Paper
Loading Paper Into the Multiple Bypass Tay
Use the multiple bypass tray when printing on plain paper, postcards, envelopes,
overhead projector transparencies and label sheets.

To load plain paper

1
Open the multiple bypass tray.
When loading large-sized paper,
open the tray extension.
2
Adjust the paper guides to fit the
size of the paper, and then insert
the paper as much as possible into
the feed slot.
Note
Do not load so much paper
that the top of the stack is high-
M
er than the
Make sure that the paper
guides are pushed up against
the edges of the paper.
Di2010f/Di2510f/Di3010f/Di3510f
mark.
Tray extension
Paper guides
5
5-13