Table of Contents
Advertisement
9.2 When Incorrect Copies Are Printed
Symptom
The edge of the printed output is
dirty.
* If the problem is not corrected even after the operations described above are performed, contact your
service representative.
Di2010f/Di2510f/Di3010f/Di3510f
Possible Cause
The document pad is dirty.
The selected paper size is
larger than the document (with
×
Zoom set to "
1.000").
The orientation of the
document is different from the
orientation of the copy (with
×
Zoom set to "
1.000").
The copy was reduced to a size
smaller than the paper (a
Custom Zoom setting was
selected).
Remedy
Clean the document pad with a
soft cloth dampened with a mild
detergent.
Select a paper size that is the
same size as the document.
Otherwise, set Zoom to "Auto
Size" to enlarge the copy to the
selected paper size.
Select a paper size that is the
same size as the document.
Otherwise, select a paper
orientation that is the same as
the that of the document.
Select a zoom ratio that adjusts
the document size to the
selected paper size.
Otherwise, set Zoom to "Auto
Size" to reduce the copy to the
selected paper size.
9
9-5
Advertisement
Table of Contents
