When The Message "The Staple Cartridge Is Empty." Appears; Replacing The Staple Cartridge - Minolta Di620PE Operato's Manual

4-8

3. When the Message "The Staple Cartridge is empty." Appears

Replenish Toner

Replacing the Staple Cartridge

<Only when the Finisher FN-3 is mounted>
1 Holding the Finisher Lock Release Lever,
slide the Finisher away from the printer.
2 Open the Finisher Front Door.
Slide out the Staple Unit.
3
Di620PE Operator's Manual
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
4 While pressing down the Staple Cartridge
Lever, pull the Staple Cartridge out of its
port.
4115O014AA
5 Pull the staple sheet about 3 cm out of the
new Staple Cartridge and break off that
portion.
1155O067AA
1155O068AA
1155O069AA
1136O012AA