When The Message "The Staple Cartridge Is Empty." Appears; Replacing The Staple Cartridge - Minolta Di620 Operator's Manual

5-8

3. When the Message "The Staple Cartridge is empty." Appears

<Only when the Finisher FN-3 is mounted>
<Only when the Finisher FN-102/Mailbin Finisher is mounted>

Replacing the Staple Cartridge

<Only when the Finisher FN-3 is mounted>
1 Holding the Finisher Lock Release Lever,
slide the Finisher away from the copier.
Open the Finisher Front Door.
2
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
1155P021CA
1155P020CA
3 Slide out the Staple Unit.
1155O066AA
While pressing down the Staple Cartridge
4
Lever, pull the Staple Cartridge out its port.
1155O067AA
1155O067AA
1155O069AA