Minolta Di2010f User Manual page 134

7.1 Specifying Finishing Settings
Notes on Using the "Sort" and "Group" Settings
G
If a document positioned on the original glass is copied using the "Sort" setting,
copying is automatically performed using the "Separate Scan" function.
For details, refer to "Auxiliary Functions" in the Advanced Operations volume of
the User Manual.
G If the finisher or the mailbin finisher is installed, each set of copies is fed out
shifted to alternating sides.
G
If the job tray is installed, but the finisher or the mailbin finisher is not, each set
of copies is fed out in an alternating crisscross pattern.
<Conditions for crisscross sorting>
G Paper of the same size must be loaded horizontally in one paper drawer and
vertically in another drawer.
G Paper of the same type must be loaded horizontally in one paper drawer and
vertically in another drawer.
G
The "Mixed Orig Detection" function must not be selected.
G
None of the following can be selected: a stapling or the "Hole Punch" setting and
the "Page Insertion", the "Cover Mode" and the "Image Repeat" functions.
G A paper drawer cannot be selected.
Shift Sorting
Each copy set is fed out shifted to alternating
sides.
Di2010f/Di2510f/Di3010f/Di3510f
7
7-5