When The Message "Cannot Staple." Appears; To Clear Jammed Staples - Minolta DI2010 User Manual

8
8.5

When the Message "Cannot Staple." Appears

To clear jammed staples

When a finisher is installed and the staples are jammed, the message shown below
appears.
Follow the procedure described below to clear the jammed staples.
Follow the procedure described below to remove the paper and staples.
Note
When the message "Cannot Staple." appears, clear the jammed staples as de-
scribed below.
Not following the following procedure and forcefully pulling out the paper may
result in damage to the "Stapler Unit".
1
Remove all paper from the
finisher.
8-30
8.5 When the Message "Cannot Staple." Appears
Di2010/Di2510/Di3010/Di3510