Table of Contents
Advertisement
7
Note
A stapling setting cannot be selected if another job has been interrupted.
When making copies while using a staple setting, be careful of the selected sta-
pling position.
For details, refer to page 7-11.
If "Corner Staple" was selected, the stapling position cannot be specified. How-
ever, if the "Corner Staple" setting is used together with the "Hole Punch" set-
ting, the stapling position can be specified.
If a document positioned on the original glass is copied using a stapling setting,
copying is automatically performed using the "Separate Scan" function.
For details, refer to "Auxiliary Functions" in the Advanced Operations volume of
the User Manual.
When copying while using a stapling setting, be sure that the maximum number
of pages that can be stapled together is not exceeded.
7-8
7.1 Specifying Finishing Settings
Di2010f/Di2510f/Di3010f/Di3510f
Advertisement
Table of Contents
