Table of Contents
Advertisement
7
<Only when the finisher and the saddle kit are installed>
G
2-Point Staple
Copies printed with the "Sort" or
"Group" setting are automatically
stapled together at two points on
the left edge.
Note
Thick paper, envelopes and over-
head projector transparencies
cannot be stapled.
<Only when the finisher and the saddle kit are installed>
G
Hole Punch
Holes are punched in the copies
so they can be filed.
This setting can be combined with
the "Non-Sort", "Sort", "Group" or a
staple setting.
Note
Holes cannot be punched in enve-
lopes and overhead projector
transparencies.
Tip
As a default, "Non-Sort" or "Sort" are automatically selected depending on the
number of pages in the document. The default setting is "Non-Sort". The default
setting can be changed using a function on the User's Choice screen. For de-
tails, refer to "Changing Default Settings" of "Utility Mode Operations" in the Ad-
vanced Operations volume of the User Manual.
7-4
7.1 Specifying Finishing Settings
Di2010f/Di2510f/Di3010f/Di3510f
Advertisement
Table of Contents
