Show Mvr Members - Cisco catalyst 3750 Command Reference Manual

Hide thumbs Also See for catalyst 3750:

Table of Contents

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

In the preceding display, Status is defined as follows:

This is an example of output from the show mvr interface command for a specified port:

Switch# show mvr interface gigabitethernet1/0/2

Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED

This is an example of output from the show mvr interface interface-id members command:

Switch# show mvr interface gigabitethernet1/0/2 members

Related Commands

mvr (global configuration)

mvr (interface configuration)

show mvr members

Active means the port is part of a VLAN.

Up/Down means that the port is forwarding/nonforwarding.

Inactive means that the port is not yet part of any VLAN.

DYNAMIC ACTIVE

Enables and configures multicast VLAN registration on the

Configures MVR ports.

Displays the global MVR configuration on the switch.

Displays all receiver ports that are members of an MVR

multicast group.

Catalyst 3750 Switch Command Reference

show mvr interface

Table of Contents