Camera Settings - Interlogix TruVision DVR 20 User Manual

53BChapter 6: Advanced setup
Item Menu
Schedule
4.
Network
5.
Display
6.
User
7.
System
8.
Information
9.
Logout
10.

Camera settings

This section describes how to customize camera settings from the Camera setup
screen.
All changes made on the Camera setup screen apply only to the selected
camera. You can easily copy the camera settings of one camera to another.
Click the Camera icon in the Menu toolbar to call up the camera setup screen
(see Figure 30 on page 63). There are five camera submenus that you can
configure. You can change their settings in any order. See Table 17 on page 63.
62
Description
Configures the DVR recording times, individual camera recording
times, and holiday periods.
See "Schedule settings" on page 79 for more information.
Configures network parameters such as for LAN, DDNS, email
notification of alarms, and remote software.
See "Network settings" on page 84 for more information.
Configures how information is displayed on the main and spot
monitors, and camera sequencing order.
See "Display settings" on page 89 for more information.
Configures users, passwords, and access privileges. Defines
privilege levels.
See "Managing users" on page 92.
Configures date/time, serial control, options (such as audio and IR
remote ID), bookmarks, disk tools, firmware upgrade, configurations,
save log file, and DVR shutdown.
See "4. All changes are saved when you move to another screen.
System setup" on page 94
Displays the unit's system information such as DVR model, firmware
version, IP and DDNS addresses, email setup, remote notification,
and disk/fan status.
See "System information" on page 102.
Exits the Menu toolbar and return to live mode.
See "Logging off from setup mode" on page 60".
TruVision DVR 20 User Manual