Searching Recorded Video - Interlogix TruVision DVR 20 User Manual

6. Camera controller
7. Camera

Searching recorded video

To search and playback recorded video remotely, click the Search icon on the
browser menu toolbar. The Search screen appears. See Figure 53 on page 106.
There are three ways to search for videos remotely:
Quick Search: Videos can be searched by start date and time of recording as
well as by camera. Enter the start date and time and select which camera or
cameras to search.
Advanced Search: Videos can be searched by several criteria from submenus
in the Quick Search screen:
 Start and end time of recording
 Events: Search for alarm, motion, video loss or text inserts in a video. See
"Searching video by events" on page 56 for further information.
 Motion detection: Search for motion in a specific area of a video. See
"Searching video by motion activity" on page 57 for further information.
 Bookmarks
Disk analysis: This allows you to get a broader sense of the video data stored
on the DVR hard drive. The functions available are the same as those in the
Main toolbar. See "Searching video using disk analysis" on page 55 for further
information on using this function.
TruVision DVR 20 User Manual
selected cameras to the location specified on the PC.
 Take a snapshot of the live mode recordings from the
currently selected cameras to the location specified on
the PC.
 Enable/disable bi-directional audio.
Enable/disable audio.

Use the volume bar to adjust the volume level.
Click to select a camera. Camera cameo is displayed full
screen.
The status of each camera is indicated by different colors.
Click to select a camera cameo. Double-click for full
screen display. The selected camera cameo is highlighted
in a green frame.
54BChapter 7: Web browser
105