Interlogix TruVision DVR 20 User Manual page 91

E-mail settings
The TVR 20 has the option to send e-mail notifications of alarm events through
the network. E-mails can be sent to up to three different addresses. Use the
Email Setting screen (shown in Figure 44 below) to configure the e-mail settings.
Figure 44: Email setup screen
To define e-mail settings:
1. In the Menu toolbar click the Network icon to display the Network screen.
2. Click the Email submenu. The Email submenu screen appears.
3. Enter the following information:
Option
SMTP Server
SMTP Port
Authentication
SSL
User name
Password
Confirm
Sending email
Receiver email 1
Receiver email 2
TruVision DVR 20 User Manual
Description
Enter the SMTP (e-mail) server's address.
Note: For a more reliable e-mail service, enter the IP address.
Enter the port number used by the SMTP server.
Check this box if the SMPT server requires authentication (user
name and password).
Check this box if the mail server must be encrypted.
Enter the user name if the SMTP server requires authentication.
Enter the password if the SMTP server requires authentication.
Re-enter the password if the SMTP server requires
authentication.
Enter the e-mail address of the sender (DVR 20).
Enter the first e-mail address to whom the notification is sent.
Enter the second e-mail address to whom the notification is sent
53BChapter 6: Advanced setup
87