Interlogix TruVision DVR 20 User Manual page 32

51BChapter 4: Operating instructions
Figure 12: Controls on the IR remote control
1. HD button: For future use.
2. Alarm button: Acknowledge an alarm.
3. Live button: Switch to live mode.
4. Display button: Toggle between the
multiview screens.
5. Sequence button: Start and stop
sequencing.
6. Main & spot monitors: Toggle between
the main and spot monitors.
7. Device button: If there is more than one
TVR 20, select the device to control.
8. Search button: Open the Advanced
Search menu.
9. Menu button: Access the main menu
To place batteries into the remote control:
1. Remove the battery cover.
2. Insert the batteries. Make sure that the positive (+) and negative (−) poles are
correctly placed.
3. Replace the battery cover.
To connect the remote control to the TVR 20:
1. Turn on the TVR 20 and wait for the live video to appear.
2. On the remote control, press the DVR button for the required TVR 20 device.
The remote control is now operational.
28
10. Replay button: Replay the selected file
from the beginning.
11. ESC button: Go back one step.
12. Arrow buttons: Use to select a command,
option, or button on a screen.
13. Enter button: Use to confirm a selection.
14. PTZ button: Start PTZ operation on the
selected camera.
15. Lens control buttons: Control the zoom,
iris, and focus of a camera.
16. Numeric buttons: Select a camera, and
enter numbers.
17. Archive: Open the Quick Archive menu.
18. Playback buttons: Control playback.
TruVision DVR 20 User Manual