Interlogix TruVision DVR 20 User Manual page 71

Figure 33: Camera motion screen
To setup motion detection:
1. In the Menu toolbar click the Camera icon.
2. Click the Motion submenu. The camera motion screen appears.
3. Enter or change the settings, as required:
Option
Camera
Trigger
Sensitivity
Target size
4. Click the Edit Motion Grid button. The Motion screen appears. Change the
settings, as required:
TruVision DVR 20 User Manual
Description
Select the camera number.
The camera title will change automatically depending on the camera
selected.
There are three options to select how motion detection is handled:
Off: Motion activity is not recorded.
Event: The event is recorded but does not trigger an alarm.
he number displayed is that of the selected camera. Motion
[x]: T
Alarm
activity is recorded and triggers an alarm.
Select one of the options.
Set the motion sensitivity level. There are nine sensitivity levels: 1
(lowest) to 9 (highest). If level 1 is selected, the unit will not respond to
any motion detection.
Select the sensitivity level.
Set the minimum number of zones in a camera image that must be
activated simultaneously before it is considered to be valid motion.
Select a value between 0 and 352.
53BChapter 6: Advanced setup
67