Display Settings - Interlogix TruVision DVR 20 User Manual

To define e-mail settings:
1. In the Menu toolbar click the Network icon to display the Network screen.
2. Click the Notify submenu. The notification setup submenu screen appears.
Note: See "E-mail settings" on page 87 for setting up the sender and receiver
e-mail addresses.
3. Select a checkmark in either box to enable.
4. All changes are saved when you move to another screen.

Display settings

Use the Display screen to configure how information is displayed on the main
and spot monitors. There are three Display screens:
 Setup
 Main SEQ setup
 Spot SEQ setup
You can change the settings in the screens in any order. They are described in
the following sections.
Click the Display icon in the Configuration menu bar on the top of the screen to
call up the Display configuration screen. Click the required Display submenu.
Information displayed on screen
Use this screen to configure what information appears on screen as well as the
time out time and dwell time. The TVR 20 lets you display text information from a
point-of-same (POS) device linked through a network or serial port. The text can
be overlaid on live video, recorded and played back.
You can select what information appears on both the main and sport monitor
screens. There are more options available for the main monitor.
TruVision DVR 20 User Manual
53BChapter 6: Advanced setup
89