Interlogix TruVision DVR 20 User Manual page 43

System status information:
Appears automatically on-screen:
Fan failure
Only appears on-screen when set up in the Display menu:
Monitor A Monitor B
selected selected
Audio in Motion
Selecting the camera display
To select the camera displayed:
 Mouse
1. In live mode right-click the mouse to display the Main toolbar.
2. Click the Switch Channel icon. The camera number toolbar appears (16-
channel DVR shown).
3. Click the camera number desired. The selected camera display appears.
 Front panel
In live mode press a numeric button on the front panel to switch to the
corresponding camera display. For example, press button 2 to view camera 2 in
full screen mode. The Main toolbar must be closed.
Viewing in multiscreen
The 16-channel TVR 20 has seven multiscreen display formats available as well
as full screen. The eight-channel TVR 20 has six multiscreen display formats.
A cameo is any cell in a multiscreen display. A camera picture can only be shown
in one cameo at a time. To change the order of cameras in the cameos, see
"Switching cameras" on page 41.
To change the multiscreen format:
Note: You cannot scroll between the multiscreen formats if you are in digital
zoom mode (the word Zoom appears on the top of the screen.) Press MENU to
exit digital zoom mode and return to live mode.
TruVision DVR 20 User Manual
HD failure HD temperature too
New firmware
Event
52BChapter 5: Basic operation
No network
high
Sequence Alarm
39