Interlogix TruVision DVR 20 User Manual page 49

To program a preset position using the mouse:
1. Select a camera on-screen.
2. Right-click the mouse. The Main toolbar appears on-screen.
3. Click the PTZ icon. If requested, select a user name and enter the password
in the Login screen. The PTZ toolbar appears on-screen.
4. Click the Preset button. A virtual keyboard appears on-screen.
5. Enter the numbers of the new preset position. The number appears in the top
of the keyboard. Up to four digits can be entered. Correct the entry by
pressing the Preset icon on the PTZ toolbar.
6. Click the Set button on the virtual keyboard to set the preset ID.
7. In the PTZ toolbar click the Save icon to save all changes.
8. When finished, press MENU to quit PTZ mode and return to live mode.
To program a preset position using the front panel:
1. Select a camera on-screen.
2. Press and hold the ENTER key. The PTZ Help pop-up screen appears. If
requested, select a user name and enter the password in the Login screen.
3. Press the EXPORT button. A virtual keyboard appears on-screen.
4. Enter a Preset number. The number is displayed in the keyboard window.
Correct the entry by pressing the EXPORT button again and re-enter the
preset number.
5. Click the Set button on the virtual keyboard to set the preset ID.
6. When finished, press MENU to quit PTZ mode and return to live mode.
Using shadow tours
A shadow tour allows a preprogrammed motion of the camera.
Note: You must be in live mode.
TruVision DVR 20 User Manual
52BChapter 5: Basic operation
45